FT Series Ultra low voltage high current programmable DC electronic load (0.3V, 1500A)
Ultra-low voltage and high current DC electronic load is a high reliability and high performance electronic load product developed based on FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply test. For different current levels, this product includes three series: NZ, N+, N. Its voltage is 0 ~ 10V, 20V or 40V, of which NZ series can be 0V full current with load, N+ and N series are ultra-low voltage full current with load. Carrying capacity up to 0V@960A, 0.2V@1200A, 0.3V@1500A. This series of products with high precision, high cost performance, is a good choice for your test.
Ultra-low voltage and high current DC electronic load is a high reliability and high performance electronic load product developed based on FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply test. For different current levels, this product includes three series: NZ, N+, N. Its voltage is 0 ~ 10V, 20V or 40V, of which NZ series can be 0V full current with load, N+ and N series are ultra-low voltage full current with load. Carrying capacity up to 0V@960A, 0.2V@1200A, 0.3V@1500A. This series of products with high precision, high cost performance, is a good choice for your test.
Feature
■Low-voltage load capacity can reach up to 0.2V@1200A;
■Support external analog programming control;
■Battery capacity and battery internal resistance test;
■CC, CV, CR, CP test modes;
■Short circuit simulating;
■Support far-end/near-end measurement switching;
■Parallel up to 10 identical units through master-slave mode (FT6800N only);
■TFT color LCD screen;
■20KHz dynamic test, rising/falling slew rate adjustable;
■ Sequence test;
■OVP, OCP, OTP, OPP, reverse connection protection etc;
■Communication ports: RS232, LAN, optional GPIB;
Application Areas
1. Fuel cell testing;
2. Forced battery discharge test;
3. Power supply system test of CPU and power devices;
4. Other low-voltage and high-current test scenarios.
Ultra low voltage full current load
Ultra-low voltage high-current DC electronic load has ultra-low internal resistance characteristics, the minimum internal resistance < 0.2mΩ. FT6430N+ can achieve 1050A current pull load at 0.2V input, and the power is only 3kW. Compared with the ordinary electronic load, the power is only 1/18 under the same low voltage load condition. Smaller test power can provide larger test current, which can greatly reduce test cost in fuel cell membrane electrode, monolithic cell and short stack test.
Static Function
The FT6200A series electronic load has four test modes: constant current, constant voltage, constant resistance and constant power, which can meet comprehensive test requirements.
Sequence test
The electronic load provides sequence test feature. The user can edit a load test sequence to simulate various changes of the load input, which is suitable for various complex load tests.
Battery capacity test
The electronic load provides battery capacity test function, it uses the constant current (CC) mode for battery discharging process. During the process, the load will automatically records the voltage, current, time and AH.
Model list available
| Model | Spec | Size | Remark |
| FT6412NZ | 10V/120A/800W（0V@120A） | 3U | 0V Full current with load |
| FT6420NZ | 10V/240A/1.6kW（0V@240A） | 3U | 0V Full current with load |
| FT6430NZ | 10V/360A/2.4kW（0V@360A） | 6U | 0V Full current with load |
| FT6440NZ | 10V/480A/3.2kW（0V@480A） | 6U | 0V Full current with load |
| FT682032NZ-20-480 | 20V/480A/3.2kW(0V@480A) | 7U | 0V Full current with load |
| FT682064NZ-20-480 | 20V/480A/6.4kW(0V@480A) | 7U | 0V Full current with load |
| FT682048NZ-20-720 | 20V/720A/4.8kW(0V@720A) | 11U | 0V Full current with load |
| FT682096NZ-20-720 | 20V/720A/9.6kW(0V@720A) | 11U | 0V Full current with load |
| FT682064NZ-20-960 | 20V/960A/6.4kW(0V@960A) | 14U | 0V Full current with load |
| FT68212NZ-20-960 | 20V/960A/12.8kW(0V@960A) | 14U | 0V Full current with load |
| FT6412N+ | 20V/350A/1.2kW（0.2V@350A） | 3U | |
| FT6420N+ | 20V/700A/2kW（0.2V@700A） | 3U | |
| FT6430N+ | 20V/1050A/3kW（0.2V@1050A） | 3U | |
| FT6412N | 40V/200A/1.2kW（0.2V@200A） | 3U | |
| FT6420N | 40V/400A/2kW（0.2V@400A） | 3U | |
| FT6430N | 40V/600A/3kW（0.2V@600A） | 3U | |
| FT6840N | 40V/600A/4kW（0.2V@600A） | 4U | |
| FT6880N | 40V/1200A/8kW（0.3V@1200A） | 8U | |
| FT68120N | 40V/1500A/12kW（0.3V@1500A） | 12U | |
| Communication interface and other optional accessories refer to the corresponding conventional electronic load, larger specifications can be customized | |||
Feature
■Low-voltage load capacity can reach up to 0.2V@1200A;
■Support external analog programming control;
■Battery capacity and battery internal resistance test;
■CC, CV, CR, CP test modes;
■Short circuit simulating;
■Support far-end/near-end measurement switching;
■Parallel up to 10 identical units through master-slave mode (FT6800N only);
■TFT color LCD screen;
■20KHz dynamic test, rising/falling slew rate adjustable;
■ Sequence test;
■OVP, OCP, OTP, OPP, reverse connection protection etc;
■Communication ports: RS232, LAN, optional GPIB;
Application Areas
1. Fuel cell testing;
2. Forced battery discharge test;
3. Power supply system test of CPU and power devices;
4. Other low-voltage and high-current test scenarios.
Ultra low voltage full current load
Ultra-low voltage high-current DC electronic load has ultra-low internal resistance characteristics, the minimum internal resistance < 0.2mΩ. FT6430N+ can achieve 1050A current pull load at 0.2V input, and the power is only 3kW. Compared with the ordinary electronic load, the power is only 1/18 under the same low voltage load condition. Smaller test power can provide larger test current, which can greatly reduce test cost in fuel cell membrane electrode, monolithic cell and short stack test.
Static Function
The FT6200A series electronic load has four test modes: constant current, constant voltage, constant resistance and constant power, which can meet comprehensive test requirements.
Sequence test
The electronic load provides sequence test feature. The user can edit a load test sequence to simulate various changes of the load input, which is suitable for various complex load tests.
Battery capacity test
The electronic load provides battery capacity test function, it uses the constant current (CC) mode for battery discharging process. During the process, the load will automatically records the voltage, current, time and AH.
Model list available
| Model | Spec | Size | Remark |
| FT6412NZ | 10V/120A/800W（0V@120A） | 3U | 0V Full current with load |
| FT6420NZ | 10V/240A/1.6kW（0V@240A） | 3U | 0V Full current with load |
| FT6430NZ | 10V/360A/2.4kW（0V@360A） | 6U | 0V Full current with load |
| FT6440NZ | 10V/480A/3.2kW（0V@480A） | 6U | 0V Full current with load |
| FT682032NZ-20-480 | 20V/480A/3.2kW(0V@480A) | 7U | 0V Full current with load |
| FT682064NZ-20-480 | 20V/480A/6.4kW(0V@480A) | 7U | 0V Full current with load |
| FT682048NZ-20-720 | 20V/720A/4.8kW(0V@720A) | 11U | 0V Full current with load |
| FT682096NZ-20-720 | 20V/720A/9.6kW(0V@720A) | 11U | 0V Full current with load |
| FT682064NZ-20-960 | 20V/960A/6.4kW(0V@960A) | 14U | 0V Full current with load |
| FT68212NZ-20-960 | 20V/960A/12.8kW(0V@960A) | 14U | 0V Full current with load |
| FT6412N+ | 20V/350A/1.2kW（0.2V@350A） | 3U | |
| FT6420N+ | 20V/700A/2kW（0.2V@700A） | 3U | |
| FT6430N+ | 20V/1050A/3kW（0.2V@1050A） | 3U | |
| FT6412N | 40V/200A/1.2kW（0.2V@200A） | 3U | |
| FT6420N | 40V/400A/2kW（0.2V@400A） | 3U | |
| FT6430N | 40V/600A/3kW（0.2V@600A） | 3U | |
| FT6840N | 40V/600A/4kW（0.2V@600A） | 4U | |
| FT6880N | 40V/1200A/8kW（0.3V@1200A） | 8U | |
| FT68120N | 40V/1500A/12kW（0.3V@1500A） | 12U | |
| Communication interface and other optional accessories refer to the corresponding conventional electronic load, larger specifications can be customized | |||
Shenzhen Faithtech CO., LTD. Faithtech Key Clients (20 years)
Our Office Working hours :
From Monday to Friday 8:30~17:30
Office address : Address: 3F, BLDG 1, GOTO Technology Park, 137 Bulan Road, Longgang District, Shenzhen City, China
If you need help with a quote, purchase orders, or other sales related issues,
Please write us at: xiangyang.guo@faithtech.cn,
our sales engineer will respond same day or next business day if after hours.
By chat: you also can connect to our skype ID : garyguoguo to start a live chat. or by Whatsapp ID :0086-15817482598
IF you like, please feel free to Call us at : 0086-15817482598, our sales engineer speak good English, will answer your questions (7 days every week) right away. so do not hesitate to call us if you have any questions.
Factory address :3F, BLDG 1, GOTO Technology Park, 137 Bulan Road, Longgang District,
Shenzhen City, China
